Rear-projection Tvs will occasionally necessitate a bulb replacement. This an uncomplicated fix that takes just some few minutes, but there are safety precautions to keep from mind, as nicely as some things you may do to enhance the life about the recently installed bulb. By means of doing this repair properly, you'll considerably extend the lifetime of both the bulb and the Tv it sits in.
Difficulty: Moderate
Things You'll Require
Replacement bulb and housing Phillips screwdriver
Suggest Edits
2 Change off also unplug your Tv, in that case wait at least an hour for the bulb and bulb housing to cool.
3 Locate the bulb housing on your Television. Typically, it's on the rear, toward the bottom, plus is covered by a panel. It's generally independent from the area devoted to cable connections.
4 Operate the screwdriver to remove the outside panel. You'll see the bulb and bulb housing just inside.
5 Remove the screws that hold the bulb housing in location, then gently slide the apparatus out. Location the replacement in the similar monitors plus gently slide it inside place till there is a click or till it won't slide inside any further.
6 Replace the outer panel, plug from the Tv, and turn it on to verify that is the replacement was successful.
Related Searches. hlr utbildning.
Tips & Warnings
Plan the repair before the prior lamp burns out. You'll typically notice flickering or a reduction in picture quality whilst the bulb is pertaining to to burn out. Unplugging the Tv before replacing the bulb yous important to keep against the danger regarding shock.
Suggest item
References
DLP Television Examine
